| | | | System: | | NTSC/PAL | | Recording Frame Rate: | | NTSC Max. 30fps (quad);
PAL Max. 25fps (quad) | | Recording Modes: | | Continuous, Motion Detection, Time Schedule | | Motion Detection: | | Select Area & Adjust Sensitivity for Each Camera |
| | | | 1. | 4 Channel BNC Camera Input. | | 2. | 1 Channel BNC Monitor. | | 3. | NTSC/PAL Optional. | | 4. | Video Loss Alarm Function. | | 5. | Motion Detection With Area Setting. | | 6. | One ATA-100 Hard Disk Interface. | | 7. | Built-in Fixed HDD Rack. | | 8. | Support Over 200G Byte HDD. | | 9. | Time Schedule Record/Motion Triggered Record. |
| | | |
ITEM | DESCRIPTION | NOTE | Video Format | NTSC/PAL | | Operation System | None | STAND-ALONE | Camera Input Channel | 4 Channel Composite BNC | | Video Output Channel | 1 Channel Composite BNC | | Display Frame Rate | NTSC | 120 fps (frames per second) | 40fps | PAL | 100 fps | 45fps | Recording Frame Rate (Quad) | NTSC | Max. 30fps (Quad) | Quad Mode | PAL | Max. 25fps (Quad) | Quad Mode | Recording Frame Rate (Each Mode) | NTSC | Each Channel = 30 Number of Source | Max. 30 fps (Each Channel) | PAL | Each Channel = 25 Number of Source | Max. 25 fps (Each Channel) | Record Mode | Continuous, Time Schedule, Motion Triggered. | Resolution | Display | NTSC: 72080 | Quad:640 224 (total) | PAL:720 576 | Record | NTSC: 320 112, 640 272 | Each: 640 224 | PAL: 320 136, 640 272 | Low: 12K Byte | Video Compression Format (Each Channel) | Modified Motion-JPEG | Normal: 15K Byte | (12-20K bytes/frame) | High: 20K Byte | Over 200G Byte | ATA-100 interface | Estimated Record Length | (120 x 1024 x 1024 K byte) (7 x 15 x 60 x 60) = 332 Hours | Search | Method | Time, Date, Event | Full Screen | YES | |
|
| | | | 1. | Before operate the system, please carefully read the direction. | | 2. | Please pull out the AC plugs and cut the DC connection before doing operation to the case. | | 3. | It must conform product's final configuration to nation's applicable laws and legal norms. |
| | | | | Prevent The Damage Caused by Static Discharge: |
| Static discharge would damage equipment and circuit. The equipment would be invalidated completely or discontinuously if static discharge is treated improperly. According to the preventive measure, when moving or placing equipment, the ground wire included in fittings could be used to make sure case earth and discharge the static to earth. Before touch the main board, professionals please put on static ring is well touching skin. |
| | | | | Check the power supply to make sure the supply system is well grounding, and equipment's import power is stable and reliable. If necessarily, please install a pressure control. The short circuit safeguard in a building must be assured there is a fuse of 220V, 10A or a breaker in the leg of a circuit. |
| | | | The following conditions will reduce image's transport quality, and even damage hardware system:
1. The power supply system is grounding poorly.
2. Excess mains fluctuations. |
| | | |
| 1 x 4 CH Recording Recorder | | 1 x Power Cord | | 1 x Power Adapter | | 1 x User Manual |
| |
It takes about 7-10 days days to deliver the goods to the United States and 10-15 days days to European countries and other countries.
Copyright © 2012 SPYONSALE.COM Ltd. All Rights Reserved.
|
|
