| ITEM | DESCRIPTION | NOTE |
| Video Format | NTSC/PAL | |
| Operation System | STAND ALONE | |
| Camera Input Channel | 8 Channel Composite BNC | STAND-ALONE |
| Video Output Channel | 2 Channel Composite BNC USB 2.0 Port | |
| Display Frame Rate | NTSC | 120 frames | 4 x 30 frames |
| PAL | 100 frames | 4 x 25 fames |
| Recording Frame Rate (QUAD) | NTSC | Max 30 fps (Quad) | Quad Mode |
| PAL | Max 25 fps (Quad) | Quad Mode |
| Recording Frame Rate (EACH) | NTSC | Each Channel = 30 Number of Source (frames) | Max. 30 frames (Each Channel) |
| PAL | Each Channel = 25Number of Source (frames) | Max. 25 frames (Each Channel) |
| Record Modes | Continuous, Schedule, Motion Triggered, Sensor Triggered |
| Resolution | Display | NTSC: 720 x 480
PAL: 720 x 576 | |
| Record | NTSC: 320 x 112, 640 x 224; PAL: 320 x 136, 640 x 272 | Quad: 640 x 224 (total)
Each: 640 x 224 |
| Video Compression Format (Each Channel) | Modified Motion-JPEG (12-20K bytes/frame) | Low: 12K Byte
Normal: 15K Byte
High: 20K Bytespan> |
| HDD Support | Over 200G Byte | ATA-100 Interface |
| Estimated Record Length | 120G Hard disk @ 7 fames per second @ normal Quality (120 x 1024 x 1024 K byte)(7 x15 x 60 x 60) = 332 Hours |
| Search | Method | Time, Date, Event | |
| Full Screen | YES | |
| Sensor, Alarm | 4 Inputs (Normally Open/Normally Closed)1 Output (Relay 2A 28VDC/2A 125VAC)Camera Signal Loss Alarm |
| PTZ | YES | PELCO-D PELCO-P |
| USB | YES | USB 2.0 Port for playback |
| Audio (In 1CH/Out 1CH) | Optional | |
