4-In-1 Full Wired Intellisense Alarm Systems with Professional Design

Description:

• Wired Intellisense Alarm Systems
• Intellisense Alarm System Specifications:
• Compatible with a wide range of detection devices
• Comes with LED keypad
• Controlling 8 zones via microcomputer, programming via keypad.
• Automatic dialing mobile phone in accidence to alarm (without recording function).
• Automatic dialing pager to alarm upon emergency.
• Access Police Reporting centre upon emergency.
• Arming / disarming by entering password on keypad.
• Simple programming: Caller No., receiving call No., address code, Password, delay alarm time, arming/disarming way can be set at user's option.
• Built-in lightning proof circuits
• Use 16AWG green jacketed solid-conductor wire to connect ground wire from box-doorhinge to earth Ground
• All outputs are power limited
• If programmed for EOL or supervised loop, the 2.2K ohm EOL resistor must be at the end of circuit
• Incorrect wiring connections may lead to circuit damage
• The initialize installer passwords: 012345
• The initialize master passwords: 1234
• Arming type: goof-proof
• Emergency soft zone: chirp buzzing warning
• Fire soft zone: Pulsed Intermittent warning
• Police soft zone: steady warning
• Timing:
  - Entry time: 60 seconds and prewarn
  - Exit time: 30 seconds and prewarn
  - Bell time: 5 minutes
• Power supply: 12V DC, 6.5Ah sealed lead-acid battery
• Current: 350mA maximum, 250mA with keypad
• Replace battery every 3-5 years
• Keypad Specifications:
• Control panles with programmable zones
• Number of Zones: 8
• Fully programmable hardwired zones
• Automatic dialer
• Support master code, user code, installation code, guest code for different purpose
• Report: Dual classified or backup reporting style
• Digital Communicator: three 18-digit phone numbers at most
• Message Formats: 3/1 extended, 4/2, cfskiii, 4+2 ademco and so on
• Power supply: AC 16.5V, class 2 transformer
• Standby Battery: 12 V, 6.5 Ah sealed lead-acid battery, such as Intellisense model 1265
• Dimession (L x W x H): 163 x 110 x 27mm
• Siren Horn Specifications:
• Can be widely used
• Electronic siren with high quality
• ABS plastic cabinet
• Provides loud sound
• Sound: 1-tone
• Operating voltage: 12V DC
• Working power: 15W
• Acoustic pressure: 115 +/- 3(dB/m)
• Bracket: iron stand, black color
• Color: Black
• Dimession (L x D): 104 x 102mm
• Infrared Detector Specifications:
• Outdoor distance: 60M
• Indoor distance: 180M
• Beams: 2
• Optical source: Digital infrared pulse
• Response speed: 50 ~ 700 ms
• Optical source: Infrared digital pulse mode
• Alarm output-bus: MA bus across wave carrier model
• Alarm output: NC&NO, contact rating AV / DC, 30V / 0.5A
• Wired system and BUS system compatible, holographic spot real-time report
• Adopts offset parabola highly accurate optical focussing mirror
• Two group of individual fine tuner, built-in optical collimating mirror
• Unique DSP chip, patented multi-dimensional mistake-corrective code, true detection alarm technology
• Unique displacing receiving, transmitting parts with big power, power surplus rate reaches 90%
• Full function checking, self-adaption in environment and trouble locking
• Patented balanced checking, unique digital filtering
• Adopts solid relay with long usage, non-contact, low voltage and little power consumption
• Bus output: RS-485
• Operation humidity: 5% ~ 95%
• Operation temperature: -25 ~ 60 degrees Celsius
• Vertical adjustment axis: +/- 10 degrees
• Level adjustment axis: 180 +/- 90 degrees
• Voltage: DC 13.8 - 24V, AC 11 - 18V
• Crust material: PC resin tin metal
• Remark: The end with "B" is BUS output system
• Approve and Warranty
• Approved: CE / FCC
• After sales service: 1 year warranty

Accessories:

• 1 x Keypad
• 1 x Siren Horn
• 1 x Set of Infrared Detector (2 beams, 60M)